GE280 UK Bearing

Oil Speed Rating n2:19000 rpm; Accessories:Snap-Ring; B:14.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:16000 rpm; Basic Static Radial Load Rating Co:6550 N; Basic Dynamic Radial Load Rating C:13500 N; Grease Speed Rating Open/Shielded n1:16000 rpm; d:17.000 mm; Oil Speed Rating Open/Shie

r1,2 min.5 mmD340 mma142.318 mmMass bearing pair44.7 kgCalculation factor Y11.6Calculation factor Y22.3Db min.318 mmC108 mmrc max.1.5 mmK4.5 mm

B:10.00 mm; D:85.0000 mm; Sealed Speed Rating n3:4500 rpm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:11700 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:11000 N; d:65.000 mm;

B:23 mm; Calculation factor e:0.95; Basic static load rating C0:112 kN; D:120 mm; Calculation factor A:0.033; Da max.:111 mm; Calculation factor Y2:1.07; D1 ≈:101 mm; d1 ≈:78.5 mm; r1,2 min.:1.5 mm;

Bearing:22226 EK; Initial grease fill:382.73 g; Cap bolt recommended tightening torque:400 N·m; P150°:68.1 kN; P180°:84.5 kN; R2:36.513 mm; A1:133.35 mm; P90°:113 kN; P60°:189 kN; Cap bolt, SAE grade:5;

B1:72.619 mm; d1:87.313 mm; Hydraulic nut:HMVC 20E; Mass adapter sleeve assembly:2 kg; G:99.517 mm; B4:21.438 mm; Threads per inch:12; d:100 mm; Lock washer:W 20; Sleeve:S 20x3.7/16;

d2:50 mm; T:42.25 mm; rs (min):2.5 mm; r1s (min):2 mm; D:110 mm; Dynamic (Ca):174 kN; Static (Coa):224 kN; B:40 mm; Pu:27.320 kN; r2s (min):0.6 mm;

d:35.000 mm; Basic Static Radial Load Rating Co:48000 N; Grease Speed Rating n1:5600 rpm; Accessories:Two Shields; Fillet Radius ra:1.50 mm; B:34.90 mm; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; Basic Dynamic Radial Load Rating C:52300 N; Sealed Speed Rating n3:5600 rpm;

d:90.000 mm; Basic Dynamic Radial Load Rating C:151000 N; B:52.40 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:2400 rpm; Oil Speed Rating n2:3400 rpm; D:160.0000 mm; Basic Static Radial Load Rating Co:193000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm;

Fw:25 mm; Reference speed:15000 r/min; Designation associated G design radial shaft seal with a low cross-sectional height:G 25x33x4; Fatigue load limit Pu:5.85 kN; Ew:33 mm; Basic dynamic load rating C:31.9 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD

D:160.0000 mm; d:75.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Accessories:One Seal; B:71.40 mm; Basic Dynamic Radial Load Rating C:187000 N;

D:170.0000 mm; Basic Static Radial Load Rating Co:49000 N; Grease Speed Rating n1:3200 rpm; B:58.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:135000 N; Oil Speed Rating n2:3800 rpm; d:80.000 mm;

Oil Speed Rating n2:3800 rpm; B:74.00 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:212000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; D:160.0000 mm; d:75.000 mm; Basic Static Radial Load Rating Co:212000 N;

Lubricant:Maintenance free &nd; α:3 °; da min.:461 mm; B:218 mm; d:440 mm; r2 min.:4 mm; Specific static load factor K0:500 N/mm²; Da max.:568 mm; Da min.:514 mm; Design (sliding contact surface combination):Steel/PTFE fabric;

d:10.000 mm; Basic Static Radial Load Rating Co:1560 N; D:22.0000 mm; Fillet Radius rb:0.10 mm; Basic Dynamic Radial Load Rating C:3120 N; B:6.00 mm; Grease Speed Rating n1:33000 rpm; Oil Speed Rating n2:40000 rpm; Fillet Radius ra:0.30 mm;